How To Repair A Kitchen Faucet
You should know how to repair a kitchen faucet if you are more of a DIY type of person rather than one who relies more on a repairman or plumber. In fact, it is best to know about this repair process since it is not much of a hard-technical process, but, the problem itself is a recurring one. If you know about how to repair a kitchen faucet, you will be able to save a lot and you do not have to go through the hassle of calling for a repairman every time you face some problem with your faucet.
Step-by-Step Guide On Repairing Your Kitchen Faucet
Look at the steps bellow that will help you in repairing your kitchen faucet:
1.) Remove the handle
You have to start the how to repair a kitchen faucet procedure by turning off the water supply first. Then turn your faucet on to remove any existing water from the system. Then use a hex key to loosen the screw on the handle and remove it.
2.) Remove bonnet, ball, and cam assembly
Before you can remove the ball and cam assembly, you need to loosen and remove the chrome bonnet and to do that, you need a slip-joint pliers. However, do not forget wrapping masking tape around the pliers’ teeth; otherwise, you could damage the bonnet. Once you are done, you can remove the ball-cam assembly.
3.) Remove spring
Use needle-nose pliers or forceps to take out the springs as well as the packing pieces. Now, you can clean out any buildup or sediment from inside the faucet. Clean it up thoroughly because these might be the source of your problem.
4.) Remove diverter and o-rings
First, grab the faucet spout with both of your hands and rock it back and forth to loosen it a bit. Then pull it off the faucet. You might need to exert some strength. Next, you can remove the O-rings with a spanner and the diverter with needle-nose pliers. Clean up the buildup and sediments.
5.) Reassemble components
Now, you are ready to install your new O-rings and diverter. Put and push your new diverter in place as well as the O-rings. You need to install the main O-ring first. Use some packing grease to coat the O-rings. This will keep your faucet components protected for longer.
6.) Attach the spout
Once you are done with the O-rings and diverter, you can press back the spout into its place. If you are interested, you can look for new style spouts in the market. You need to press it hard and you should be able to feel a click-type vibration. Next, slide back the springs and packing pieces.
7.) Finish installation
Reinstall the ball-cam assembly and the bonnet. Next, screw the handle back to its place. Turn on the water supply for any leaking or dripping.
Of course, you always have the privilege of learning how to repair a kitchen faucet but not facing a faulty faucet in the first place is obviously the better choice. For that to be true, you need to rely on a brand that provides the best quality faucets. Mico faucets are obviously good options in that case. If you equip your kitchen with a Mico faucet, you are bound to experience lesser faucet problems than people around you.